One of the great advantages of the wedi shower pan is its ability to be customized easily to almost any shower pan configuration. The Wedi shower pan installation design on this job required a lot of cuts using a 6 x 6 Wedi Fundo pan. This was accomplished using a cordless circular saw, a straight edge, sharpie, and tape measure. The wedi shower system pan is sloped at ¼ inch a foot on the entire pan to the drain and so it does not matter where you cut it as long as you do not cut into the drain. There are many Wedi Shower sizes available. There was one stud that was leaning in a little and we used a hammer to push it back very slightly. After we moved the stud perhaps a 1/16 of an inch the Wedi Shower Base fit like a glove. The Wedi Drain then was installed on the underside of the pan. After we used modified thin set to install the Wedi Pan the Wedi shower continued with Wedi board installation. You can customize any Wedi Shower Kit from Masonry & Glass Systems with 2 inch Wedi Building board in order to build a bench. The assembly of the bench is straightforward and quick using only the Wedi 2 inch board and Wedi sealant.
As you can see with this blog using the Wedi Shower Systems allows complete flexibility in shower design without the hassle.
Masonry & Glass Systems is a stocking distributor of Wedi Shower Systems and the wedi shower pan. We can ship the same or next day.