The results of using a Wedi Shower System are truly impressive. This blog will go from before, during and after pictures to demonstrate the ease of use, speed of installation, and final results of a Wedi Tub Replacement Shower. The bathroom had an existing tub that was 5’ long. The 3’ x 6’ Wedi offset pan fit nicely into the existing tub drain. This allowed a large shower of 3’ x 6’ to fit into the existing space with a little bit of trimming to the length to 5’ 10”. The Wedi wall panels were erected and then using Wedi 2” board a custom bench was assembled within the shower enclosure. This bench took about 45 minutes to build. In addition twin 16” x 22” soap niches were installed to assure plenty of storage for soaps etc. As in many tub to shower conversions a window is present. Wedi ½ board was installed up to the window frame and caulked with Wedi sealant. The window sill was slightly sloped to promote drainage. The entire Wedi installation to get the shower tile ready took about 5 hours. Lastly, the finished product, a shower that will not leak, will not mold or mildew and because of the closed cell foam will be warm even in the winter.
Masonry & Glass Systems stocks most Wedi products for immediate delivery and we are always available for questions on your Wedi installation.
Wedi Shower Systems: Tub Replacement
Masonry & Glass Systems can ship Wedi backer board material almost anywhere.
We ship custom Wedi Shower Systems every week!
WE SHIP TO ALL 48 LOWER STATES
Call us Mon-Fri at 314-535-6515
Click the link below to receive a free quote for your Wedi Shower System
If you or someone you know is looking for a tub replacement using Wedi Shower Systems to complete a home improvement project, a doorless shower or any other bathroom project where water and moisture is a risk, please contact Masonry & Glass Systems in St. Louis. For more information, email them at: firstname.lastname@example.org or call 314-535-6515